The
Executive™ Series
Waist High Turnstiles
Download Printable Version
as .pdf file.
www.TURNSTILES.us, INC. EXECUTIVE SERIES TURNSTILES AND ADA GATES
EXECUTIVE Series, Models EX200-Z, EX200-Z-ADA (Subject to change without
notice.)
CABINET-STYLE, WAIST-HIGH TURNSTILES
TURNSTILE SPECIFICATION: SECTION 10450
1.00 PART I GENERAL
1.01 Drawings and general provisions as specified apply to this section.
1.02 Product Data - integrator's general description for each item and
related components. For specific information, see catalog.
1.03 Shop drawings submitted upon request.
1.04 Turnstiles available in mechanical and electronic in clockwise, counter-clockwise,
or bi-directional movement of travel.
2.00 PART II PRODUCTS
2.01 Turnstile models as provided by www.TURNSTILES.us, Inc., Conifer, Colorado
2.02 EXECUTIVE" SERIES
A. EX200-Z
- Cabinet: Outer shell, inner shell, cover 14 gauge, base
7 gauge. All materials are 304 stainless steel, No. 4 satin finish.
- Arms: 1-5/16" (33mm) diameter, 12 gauge. Hub 4-1/2" (114mm)
O.D. All materials are 304 stainless steel, No. 4 satin finish.
- Control Head: Self-centering, adjustable hydraulic shock
suppression, hardened tool steel locking bars, cam and roller assemblies,
permanently lubricated bearings.
- Height: 39" (991mm); Width: 36-3/4" (933mm); Base 8-7/8"
(225mm).
- Finishes: 304 stainless steel, No. 4 satin finish.
- Keylock: Control direction of travel manually by key
to lock or unlock, or may be used to override electronic controls.
- Vertical Graphic Arrays/VGA's solid state: Nomenclature,
Green arrow / Red X
- For options, see Section 2.03.
B. EX200-Z-ADA Handicapped accessible gate
- 1. Cabinet:
Outer shell, inner shell, cover 14 gauge, base 7 gauge. All materials are
304 stainless steel, No. 4 satin finish.
- Arm: 1-5/16" (33mm) diameter,
12 gauge. Hub 4-1/2" (114mm) O.D. All materials are 304 stainless steel,
No. 4 satin finish. Arm length 36" standard. May be ordered +/- 3".
- Control
Head: Self-centering, adjustable hydraulic shock suppression, hardened tool
steel locking bars, cam and roller assemblies, permanently lubricated bearings.
- Height: 39" (991mm); Width 36-3/4" (933mm); Depth: 10-7/8" (276mm); Base:
8-7/8" (225mm).
- Finishes: 304 stainless steel, No. 4 satin finish.
-
Keylock: Control direction of travel manually by key to lock or unlock,
or may be used to override electronic controls.
- Vertical Graphic Arrays/VGA's
solid state: Nomenclature, Green arrow / Red X
- For options, see Section
2.03.
2.03 OPTIONS
A. All units available in clockwise, counter-clockwise,
or bi-directional passage.
- Electronic lock modules include heavy-duty
24 VDC pull type industrial solenoids, and card reader interface. One module
for one-way control, two modules for bi-directional control. Available in
each separate direction, fail-safe (open on power failure) or Fail-Lock
(lock on power failure) modes.
- Interfacing to card readers, computer
attendance systems, coin and token acceptors, push buttons, and wireless
remote controls.
- Electronic 6 digit resetable counter with LCD display
and ten year lithium battery.
- Horizontal Graphic Array (HGA) Red X /
Green arrow / Yellow bar.
B. Additional options available on request.
3.00
PART III EXECUTION
3.01 Purchaser to install units in accordance with integrator's
shop drawings and installation manual.
3.02 Warranty: Units are warranted
against defects in materials and workmanship for a period of one year from
date of delivery. See Warranty information for specific details.
|
www.TURNSTILES.us Turnstiles